Micropile Drill Rigs August 9, 2010

Drill rigs have become a common sight on commercial construction job sites due to their versatility. Because construction sites offer unlimited variations of challenges, manufactures of drill rigs have developed technically advance machines that provide site managers and subcontractors with multiple options to facilitate speedy solutions when time is of the essence.

Unlike projects that are located on wide open spaces, renovation construction project managers must take into consideration a multitude of existing variables. Renovation challenges may include jobsites with limited access, limited overhead space, confined spaces, and the need for businesses (both onsite and adjacent) to be minimally impacted. For these reasons, a variety of options are available for use.

Project manager are sometimes challenged with the need to provide additional foundational support to existing structures. These situations result in the need for creative solutions. In most cases the existing structures pose limitations that can be resolved with traditional drill rigs.

Many manufacturers have addressed this need with low overhead drilling rigs. Some of these rigs require as little as six feet of overhead clearance to drill micropiles. To add to their allure, most of these machines also utilize rubber tracks instead of traditional steel tracks. This allows operators to enter into buildings without damaging the existing slab.

Other features that make these micro drilling rigs desirable are the ability to separate the power source from the drill rig. These attributes prove to be highly valuable, especially in situations where existing businesses wish to remain open while undergoing the construction renovation. By locating the power source in a location that is outside of the building, business owners do not experience the exhaust fumes from the diesel engines that are necessary to power the drill rigs. Placing the diesel engine outside of the structure also greatly reduces the noise that accompanies piling equipment.

Another feature that makes working with micro pile driving drill rigs is the ability of the mast to move separately of the base. Repositioning the entire machine to drill each hole can be extremely difficult in limited access operations. Intelligent design allows an operator to swing the mast from side to side as much as 120 degrees. This permits successful operation in confined spaces.

As renovations become more complex resulting from the desire of building owners to upgrade an existing structure instead of razing it and rebuilding, project managers and construction firms must continue to leverage cutting edge technologies offered by drill rig manufacturers to maintain cost efficiencies. Drill rigs that offer versatility and functionality in small spaces have become the solutions that are most often requested.

We have more information at Micropile Drill Rigs.
 

 

---