Product Specifications
As the World's One-Stop Foundation Shop®, International Construction Equipment, Inc. is the leading international manufacturer and distributor of vibratory drivers and extractors, diesel hammers, hydraulic hammers, excavator-mounted rotary heads and hammers, large and small-bore drill tooling (including EDME Kelly Bars), limited access drills, Comacchio drills, and other deep foundation equipment.
We handle both sales and rental agreements for all of our innovative products in order to boost your efficiency and make you more competitive in today’s market.
Retain ICE for your next deep foundation project and experience the difference that our high performance equipment has on your bottom-line.
Vibratory Drivers and Extractors
ModelsThese vibratory drivers / extractors are designed and manufactured in the USA by ICE®, a world leader in cost-effective foundation equipment since 1974. We continue to provide innovative products to our customers and the highest quality parts. ICE® power units run CAT diesel engines for unit reliability and easy access to parts and service from anywhere in the world. Our hammers utilize an open-loop hydraulic system to maximize efficiency and reliability, while our gear case design provides maximum pile amplitude and is light weight.* All ICE® units use the highest quality pumps and motors.
ICE® believes the expense of operating the equipment for our customers and the environment are equally important. The power unit has duplicate electronic controls via a remote control pendant for both safety and fuel efficiency. Our computerized power units can also pinpoint repair needs and provide other diagnostics. ICE power packs utilize Chevron Clarity® non-toxic, biodegradable hydraulic oil and have a heavy-duty steel enclosure and fuel-tank subbase to protect the power unit and the environment.
With our Patented Dual-pull TM suppressor available in a majority of our units, ICE® vibratory drivers / extractors are able to provide maximum vibration isolation during driving and extraction combined with high pulling capacity for tough extraction jobs. ICE® offers a full range of clamps and accessories for all types of piling jobs including our specialized V clamp. **
* Contact sales@iceusa.com for specific detail & clarification adapting our units for underwater usage and for specific detail & clarification of all hammer clamps and accessories specific to each model.
- How a Vibratory Pile Driver/Extractor Works (Print Spec)
- Model 2 with 50 (Print Spec)
- Model 14C with 230G (Print Spec)
- Model 28C with 350G (Print Spec)
- Model 44 with 350G (Print Spec)
- Model 44B with 595G (Print Spec)
- Model 50B with 595G (Print Spec)
- Model 55B with 595G (Print Spec)
- Model 55B with 700G (Print Spec)
- Model 66C with 700G (Print Spec)
- Model 66C with 800G (Print Spec)
- Model 77C with 800G (Print Spec)
- Model 84C with 800G (Print Spec)
- Model 84C with 1200G (Print Spec)
- Model 110C with 1200G (Print Spec)
- Model 110C Tandem with 1200G (Print Spec)
- Model 125C with 1200G (Print Spec)
- Do not see your equipment listed?, click here
ZR-Vibratory Drivers/Extractor
ModelsiCON® Zero Resonance vibratory driver / extractors eliminate vibration in the damaging range by adjusting eccentric moment to zero during start-up and shut-down.
- Prior to start-up, the eccentric moment is set to zero.
- During start-up, vibrator frequency passes through 600-1200 vpm with zero eccentric moment and no disturbance in the soil, structures or crane line.
- After full operating frequency (2000-2300 vpm) is reached, eccentric moment is set to maximum for driving and extracting.
- Before shut-down, the eccentric moment is again set to zero.
- During shut-down, vibrator frequency again passes through 600-1200 vpm with zero eccentric moment and no disturbance in the soil, structures or crane line.
- The iCON ZR vibratory driver/ extractors are designed to never operate at a frequency range that could cause resonance vibration to the soil, structures or crane line.
Eccentric moment is controlled from the vibrator remote-control pendant. Shifting between zero and maximum eccentric moment occurs simply and quickly.
Power Units
Models
Metric Vibratory Drivers/Extractors
ModelsThese are ICE® traditional top quality vibratory hammers with metric nomeclature for our international partners. If you are located in North America, this listing of vibratory hammers are not sold under this nomeclature. Again, this is an area to assist our international partners.
- 16C with 230M (Print Spec)
- 416L with 350G (Print Spec)
- 32B with 350G (Print Spec)
- 32C with 350G (Print Spec)
- 52B with 595G (Print Spec)
- 58B with 595G (Print Spec)
- 78C with 800G (Print Spec)
- 92C with 800G (Print Spec)
- 128C with 1200G (Print Spec)
- 142C with 1200G (Print Spec)
- V360 with 1250G (Print Spec)
- 300C with 2400G (Print Spec)
- Do not see your equipment listed?, click here
Leads, Spotters, Drive Caps and Accessories
Models
- Leads (Print Spec)
- Offshore Leads (Print Spec)
- Fixed Extended Leads (Print Spec)
- Swinging Leads (Print Spec)
- Pin Connected Swinging Leads (Print Spec)
- Sliding Extended Leads (Print Spec)
- Spotters (Print Spec)
- Drive Caps (Print Spec)
- Dawson Shackles (Print Spec)
- Dawson Pile Threaders (Print Spec)
- Do not see your equipment listed?, click here
Diesel Impact Hammers (D-series) NEW 2012
Models
- D6-32 (Print Spec)
- D8-22 (Print Spec)
- D12-42 (Print Spec)
- D19-42 (Print Spec)
- D25-32 (Print Spec)
- D30-32 (Print Spec)
- D36-32 (Print Spec)
- D46-32 (Print Spec)
- D50 (Print Spec)
- D62-22 (Print Spec)
- D80-32 (Print Spec)
- D100-13 (Print Spec)
- D125-32 (Print Spec)
- D138-32 (Print Spec)
- D160-32 (Print Spec)
- D180-32 (Print Spec)
- D225-22 (Print Spec)
- D250-22 (Print Spec)
- D280-22 (Print Spec)
- Do not see your equipment listed?, click here
ICE Pilemer - Hydraulic Impact Hammers
Models
- IP2/DKH-2U (Print Spec)
- IP3 / DKH-3U (Print Spec)
- IP4/DKH-4U (Print Spec)
- IP5 / DKH-5U (Print Spec)
- IP7/DKH-7U (Print Spec)
- IP10/ DKH-10U (Print Spec)
- IP1513 (Print Spec)
- IP1514 (Print Spec)
- IP1516 (Print Spec)
- IP1520 (Print Spec)
- IP1530 (Print Spec)
- IP1540 (Print Spec)
- IP1560 (Print Spec)
- IP1640 (Print Spec)
- Do not see your equipment listed?, click here
- Vibratory Drivers and Extractors
ModelsThese vibratory drivers / extractors are designed and manufactured in the USA by ICE®, a world leader in cost-effective foundation equipment since 1974. We continue to provide innovative products to our customers and the highest quality parts. ICE® power units run CAT diesel engines for unit reliability and easy access to parts and service from anywhere in the world. Our hammers utilize an open-loop hydraulic system to maximize efficiency and reliability, while our gear case design provides maximum pile amplitude and is light weight.* All ICE® units use the highest quality pumps and motors.
ICE® believes the expense of operating the equipment for our customers and the environment are equally important. The power unit has duplicate electronic controls via a remote control pendant for both safety and fuel efficiency. Our computerized power units can also pinpoint repair needs and provide other diagnostics. ICE power packs utilize Chevron Clarity® non-toxic, biodegradable hydraulic oil and have a heavy-duty steel enclosure and fuel-tank subbase to protect the power unit and the environment.
With our Patented Dual-pull TM suppressor available in a majority of our units, ICE® vibratory drivers / extractors are able to provide maximum vibration isolation during driving and extraction combined with high pulling capacity for tough extraction jobs. ICE® offers a full range of clamps and accessories for all types of piling jobs including our specialized V clamp. **
* Contact sales@iceusa.com for specific detail & clarification adapting our units for underwater usage and for specific detail & clarification of all hammer clamps and accessories specific to each model.
- How a Vibratory Pile Driver/Extractor Works (Print Spec)
- Model 2 with 50 (Print Spec)
- Model 23 with 50 (Print Spec)
- Model 216B with 175D (Print Spec)
- Model 11 with 230M (Print Spec)
- Model 14 with 230M (Print Spec)
- Model 14C with 230M (Print Spec)
- Model 14C with 230G (Print Spec)
- Model 22 with 335E (Print Spec)
- Model 28B with 350E (Print Spec)
- Model 28C with 350E (Print Spec)
- Model 28C with 350G (Print Spec)
- Model 44 with 350E (Print Spec)
- Model 44 with 350G (Print Spec)
- Model 416L with 350E (intl) (Print Spec)
- Model 44-50 with 575pu (Print Spec)
- Model 44B with 595E (Print Spec)
- Model 44B with 595G (Print Spec)
- Model 50B with 595E (Print Spec)
- Model 50B with 595G (Print Spec)
- Model 55B with 595E (Print Spec)
- Model 55B with 595G (Print Spec)
- Model 55B with 650E (Print Spec)
- Model 55B with 700G (Print Spec)
- Model 55C with 800E (Print Spec)
- Model 66C with 700G (Print Spec)
- Model 66C with 800E (Print Spec)
- Model 66C with 800G (Print Spec)
- Model 77C with 800E (Print Spec)
- Model 77C with 800G (Print Spec)
- Model 84C with 800E (Print Spec)
- Model 84C with 800G (Print Spec)
- Model 66 with 950E PU (Print Spec)
- Model 84C with 1200G (Print Spec)
- Model 110C with 1200G (Print Spec)
- Model 110C with 1200E (Print Spec)
- Model 125C with 1200G (Print Spec)
- Model 125C with 1250E (Print Spec)
- Model V360 with 1250E (intl) (Print Spec)
- Do not see your equipment listed?, click here
- Power Units
Models
- 50 (Print Spec)
- 85 (Print Spec)
- 175D (Print Spec)
- 230M (Print Spec)
- 230VM (Print Spec)
- 230G (Print Spec)
- 300M (Print Spec)
- 335E (Print Spec)
- 350E (Print Spec)
- 350G (Print Spec)
- 450E (Print Spec)
- 450G (Print Spec)
- 580G (Print Spec)
- 580Q (Print Spec)
- 595E (Print Spec)
- 595G (Print Spec)
- 700G (Print Spec)
- 800E (Print Spec)
- 800G (Print Spec)
- 950E (Print Spec)
- 1100E (Print Spec)
- 1200E (Print Spec)
- 1200G (Print Spec)
- 1350E (Print Spec)
- 1400E (Print Spec)
- Do not see your equipment listed?, click here
Excavator-Mounted Hammers
Models
- Diesel Impact Hammers (D-series) NEW 2012
Models
- D6-32 (Print Spec)
- D8-22 (Print Spec)
- D12-42 (Print Spec)
- D19-42 (Print Spec)
- D25-32 (Print Spec)
- D30-32 (Print Spec)
- D36-32 (Print Spec)
- D46-32 (Print Spec)
- D62-22 (Print Spec)
- D80-32 (Print Spec)
- D100-13 (Print Spec)
- D125-32 (Print Spec)
- D138-32 (Print Spec)
- D160-32 (Print Spec)
- D180-32 (Print Spec)
- D225-22 (Print Spec)
- D250-22 (Print Spec)
- D280-22 (Print Spec)
- Do not see your equipment listed?, click here
- ICE Pilemer - Hydraulic Impact Hammers
Models
- IP2/DKH-2U (Print Spec)
- IP3 / DKH-3U (Print Spec)
- IP4/DKH-4U (Print Spec)
- IP5 / DKH-5U (Print Spec)
- IP1513 (Print Spec)
- IP1514 (Print Spec)
- IP1516 (Print Spec)
- IP1520 (Print Spec)
- IP1530 (Print Spec)
- IP1540 (Print Spec)
- IP1560 (Print Spec)
- IP1640 (Print Spec)
- Do not see your equipment listed?, click here
There is no equipment at this time.
- Vibratory Drivers and Extractors
ModelsThese vibratory drivers / extractors are designed and manufactured in the USA by ICE®, a world leader in cost-effective foundation equipment since 1974. We continue to provide innovative products to our customers and the highest quality parts. ICE® power units run CAT diesel engines for unit reliability and easy access to parts and service from anywhere in the world. Our hammers utilize an open-loop hydraulic system to maximize efficiency and reliability, while our gear case design provides maximum pile amplitude and is light weight.* All ICE® units use the highest quality pumps and motors.
ICE® believes the expense of operating the equipment for our customers and the environment are equally important. The power unit has duplicate electronic controls via a remote control pendant for both safety and fuel efficiency. Our computerized power units can also pinpoint repair needs and provide other diagnostics. ICE power packs utilize Chevron Clarity® non-toxic, biodegradable hydraulic oil and have a heavy-duty steel enclosure and fuel-tank subbase to protect the power unit and the environment.
With our Patented Dual-pull TM suppressor available in a majority of our units, ICE® vibratory drivers / extractors are able to provide maximum vibration isolation during driving and extraction combined with high pulling capacity for tough extraction jobs. ICE® offers a full range of clamps and accessories for all types of piling jobs including our specialized V clamp. **
* Contact sales@iceusa.com for specific detail & clarification adapting our units for underwater usage and for specific detail & clarification of all hammer clamps and accessories specific to each model.
- ZR-Vibratory Drivers/Extractor
ModelsiCON® Zero Resonance vibratory driver / extractors eliminate vibration in the damaging range by adjusting eccentric moment to zero during start-up and shut-down.
- Prior to start-up, the eccentric moment is set to zero.
- During start-up, vibrator frequency passes through 600-1200 vpm with zero eccentric moment and no disturbance in the soil, structures or crane line.
- After full operating frequency (2000-2300 vpm) is reached, eccentric moment is set to maximum for driving and extracting.
- Before shut-down, the eccentric moment is again set to zero.
- During shut-down, vibrator frequency again passes through 600-1200 vpm with zero eccentric moment and no disturbance in the soil, structures or crane line.
- The iCON ZR vibratory driver/ extractors are designed to never operate at a frequency range that could cause resonance vibration to the soil, structures or crane line.
Eccentric moment is controlled from the vibrator remote-control pendant. Shifting between zero and maximum eccentric moment occurs simply and quickly.
- Metric Vibratory Drivers/Extractors
ModelsThese are ICE® traditional top quality vibratory hammers with metric nomeclature for our international partners. If you are located in North America, this listing of vibratory hammers are not sold under this nomeclature. Again, this is an area to assist our international partners.
